Soldering Iron Pencil
1 x Soldering Iron Pencil
1 x Bracket
5 x Interchangeable Brass Tips(Chisel point, Short point, Long point, Bevel point, Solder point)
Plug: US plug 110V
Material: Plastic + Iron
Pencil Length: Approx. 20cm/7.87''
Cable Length: Approx. 100cm/39.37''
Power Supply: 30W
Temperature Regulating Range: 0-450（℃）
Can meet your different soldering demands
Suitable On: Cork, Leather, Some Papers, Even Wax Candles, Woods Such As Beech, Sycamore, Birch Or Hornbeam
14pcs Welding Iron Kit
1 x Welding Iron Machine
1 x Soldering Stand(with cloth)
1 x Desoldering Pump
5 x Soldering Iron Tips
1 x Tin Wire Tube
1 x Tweezers
1 x Wire Stripper Cutter
2 x Electronic Wire
1 X Tool Carry Bag
Work Voltage: 110V(US)
Temperature Range: 200℃-450℃
Standard iron head: 900M-B
14 in 1, meet your requirements for your DIY.
Carry bag is very convenient to store small tools and easy to carry, which can avoid losing the soldering iron gun and accessories.
It is rather convenient to carry anywhere for repair and DIY.
Various repaired usage of electronics chipboards, jewelry, welding, watches, wiring, mobile device, computers hardware and more.
18pcs Soldering Iron Kit
1 x Soldering Iron
5 x Solder Tips
6 x Soldering Tools
1 x Screwdriver
1 x Soldering Sucker
1 x Solder Tube
1 x Anti-static Tweezers
1 x Stand
1 x Leather Tool Carry Bag
Plug: 110v US plug
Power supply: US/ 110V/ 60HZ
Welding nozzle earth impedance: ＜2Ω
Welding nozzle earth voltage: ＜2mv
Temperature range: 200~450℃
Temperature stabilization: ±5℃
Soldering nozzle model: 900M
High temperature set of head: 9HGTP
Material: Plastic handle soldering iron
Carry bag size: Approx. 26.3x14.5x4cm/ 10.35x5.71x1.57"
Soldering iron length: Approx. 19.5cm/ 7.68"
Power cable length: Approx. 1.3m/4.26ft
How To Solder:
1. Clean the parts to be joined.
2. Clean soldering iron tip and "tin" all faces of tip with a coating of solder.
3. Heat parts, not solder, to be joined.(not too high, recommend 300℃)
4. Apply flux-core solder to heated parts, not the soldering tip, and heat it till solder melts and flows freely.
1. During use, it can be placed on the iron stand or keep it flat on the work surface (in order to make the metal
parts of soldering iron has good ventilation and heat dissipation effect). Please do not hang the soldering tips
and place the tips down when heating, otherwise there is the risk of burning dissolved iron plastic handle.
2.Please do not adjust the soldering iron temperature to 450 Celsius for a long time, over excessive temperature
will accelerate the oxidation of iron, then it will be difficult to be soldering.
3. Please use a sponge to wipe clean after using, and re-tin to ensure it can be easily tinned on the soldering tips.
4. When the soldering iron is not used temporarily, soldering iron temperature should be adjusted to 200 Celsius, if you’re not using soldering iron for long time, the power supply should be turned off.
1 x Device Host
1 x Hot Air Heater
1 x Hot Air Heater Handle Bracket
1 x Welding Iron
1 x Basking Iron Seat
1 x Clean Sponge
4 x Air Heater Nozzles
1 x User Manual
Welding station voltage: AC 26V 50Hz
Welding station power: 70W
Whole machine voltage: AC 110V ± 10% 50Hz
Whole machine power: 750W (Max.)
Hot air heater voltage: AC 110V 50HZ
Hot air heater power: 700W
Temperature range: 100-500℃
Temperature stability: ±5℃
Air flow: 120L/M (Max.)
Plug: US plug (Send with an adapter according to your country)
Welding station dimension: Approx. 14x17x11cm/ 5.51x6.69x4.33"
Hot air heater length: Approx. 25cm/ 9.84"
Hot air heater and welding iron 2in1 rework soldering station.
Dual LCD digital displays to show precision temperature.
Extremely low noise and space saving design.
Intelligence self-detection function features safe personal operation.
Automatic cooling function for effectively prolonging the heater's life and protecting the hot air heater.
How to use:
1. Clean the electronic components to be soldered.
2. Once iron reaches temperature (not too high, recommend 300℃).
3. Apply a little solder to the heated iron tip to prevent oxidation, then rub the iron tip to evenly extend the solder to the surface of the iron tip.
4. Start to solder.
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.Items will be shipped within 1-3 business day when we received payment.
3.Delivery time depends on destination and other factors;
4.International buyers please note:
a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
b.Please check with your country's customs office to determine what these additional costs will be prior to buying.