1x rubber tapping block
1x pull bar
1x double headed mallet (rubber & hard)
Suitable for: 0.27in (7mm) - 0.6in (15mm) flooring.
Ideal for domestic and professional use.
Easy to use:
-Use the pull bar to eliminate gaps on the long side of the planks
- Insert the tapping block into the tongue of the plank when tapping two planks together
- Adjust the thickness of the gap using two spacers – make sure to place the spacers on the edges, leaving enough room for expansion if needed
- Use the mallet to hammer the tapping block to eliminate gaps between planks