550W 7" x 14"Mini Metal Lathe Machine Variable Speed 0-2500 RPM High Precision.



550W 7

$465.29


Deals Ends
Saturday Oct-26-2019 1:43:07
Sales Price: $465.29

Buy on Ebay!

Compare price on Amazon

Buy it now at Amazon.com!

Compare price on Walmart

Compare price at walmart.com!

Buy it now at Amazon.de Buy it now at Amazon.co.uk Buy it now at Amazon.es Buy it now at Amazon.it Buy it now at Amazon.ca



Video Reviews of 550W 7" x 14"Mini Metal Lathe Machine Variable Speed 0-2500 RPM High Precision.

eBay
Untitled Document

FEATURES

  • This precision mini lathe is designed to perform various types of processing & cutting jobs like counter face turning, drilling, threading, and bar cutting; this lathe can be used in mini precision parts processing, sample processing and modeling works.
  • Made of high grade iron, the super rigid & heat-treated lathe bed has precision-ground V-slideways
  • Driven by powerful 550 watt DC motor
  • The spindle speed is infinitely variable from 50 to 2500RPM
  • The feed speed can be adjusted according to the requirements of different work pieces

WARNING:

Do NOT change the high/low gear while running.

Please slow down the machine before converting high-speed mode into low-speed mode, or the gear may break down


PACKAGE LIST

  • 1 x Lathe Bed
  • 1 x Tray
  • 3 x Work Piece Holder
  • 11 x POM Gear
  • 1 x Chuck Wrench
  • 1 x Center
  • 1 x Open-end Wrench
  • 1 x Oiler
  • 1 x Handle Wheel
  • 1 x Acrylic Cover
  • 6 x Hex Wrench
  • 4 x Rubber Washer(with screws)

TECH SPECS

Distance Between Centers 14" Swing Over Bed 7" Swing Over Cross Slide 110mm Spindle Taper Mt3 Tailstock Taper Mt2 Chuck Diameter 100mm Spindle Bore 20mm Cross Slide Travel 65mm Top Slide Travel 35mm Spindle Accuracy 0.01mm Spindle Speed 0-2500 RPM Motor Power 550W


Box Opening Guide (Very Important)

  • Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below
  • Then take off the upper lid of the box, please refer to the picture below.
  • Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below.


s

Shipping

Orders made before 2:00 PM EST (11:00 AM PST) will be shipped the same day. Most orders will be shipped within 24 hrs during weekdays via FedEx, USPS or UPS. We do not ship on weekends or various national holidays.

Important:

  • Please make sure your shipping address is correct before we sending your package out shortly. if you want to modify your shipping address after the package is sent out, reshipping cost plus a fee of $12.5 will apply.
  • We only ship to the lower 48 states.
  • Orders will only ship to PayPal confirmed addresses
  • Orders made after 2:00 PM EST (11:00 AM PST) on Friday will be shipped the next business day.

Note:
As a professional eBay seller, we have two warehouses located in Anaheim, CA and Memphis, TN. In general, we ship out products based on distances UNLESS the closer warehouse is out of stock for the specific products that customers have ordered. Your kind consideration would be highly appreciated.

Payment

We accept payments only via PayPal.

Note:

  • Payment made after 2:00 PM EST (11:00 AM PST) on Friday, during weekends or holidays will be handled the next business day.

Warranty

This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.


If your item has been damaged in transit or becomes faulty in warranty period, please email us with pictures or video to show the problem.

Please do check everything carefully after you received the parcel, and the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.

Replacement products are provided with the same warranty as the returned products.

 

FEATURES

  • This precision mini lathe is designed to perform various types of processing & cutting jobs like counter face turning, drilling, threading, and bar cutting; this lathe can be used in mini precision parts processing, sample processing and modeling works.
  • Made of high grade iron, the super rigid & heat-treated lathe bed has precision-ground V-slideways
  • Driven by powerful 550 watt DC motor
  • The spindle speed is infinitely variable from 50 to 2500RPM
  • The feed speed can be adjusted according to the requirements of different work pieces

WARNING:

Do NOT change the high/low gear while running.

Please slow down the machine before converting high-speed mode into low-speed mode, or the gear may break down


PACKAGE LIST

  • 1 x Lathe Bed
  • 1 x Tray
  • 3 x Work Piece Holder
  • 11 x POM Gear
  • 1 x Chuck Wrench
  • 1 x Center
  • 1 x Open-end Wrench
  • 1 x Oiler
  • 1 x Handle Wheel
  • 1 x Acrylic Cover
  • 6 x Hex Wrench
  • 4 x Rubber Washer(with screws)

TECH SPECS

Distance Between Centers 14" Swing Over Bed 7" Swing Over Cross Slide 110mm Spindle Taper Mt3 Tailstock Taper Mt2 Chuck Diameter 100mm Spindle Bore 20mm Cross Slide Travel 65mm Top Slide Travel 35mm Spindle Accuracy 0.01mm Spindle Speed 0-2500 RPM Motor Power 550W


Box Opening Guide (Very Important)

  • Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below
  • Then take off the upper lid of the box, please refer to the picture below.
  • Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below.

PAYMENT

Payment

We accept payments only via PayPal.

Note:

  • Payment made after 2:00 PM EST (11:00 AM PST) on Friday, during weekends or holidays will be handled the next business day.

SHIPPING

Shipping

Orders made before 2:00 PM EST (11:00 AM PST) will be shipped the same day. Most orders will be shipped within 24 hrs during weekdays via FedEx, USPS or UPS. We do not ship on weekends or various national holidays.

Important:

  • Please make sure your shipping address is correct before we sending your package out shortly. if you want to modify your shipping address after the package is sent out, reshipping cost plus a fee of $12.5 will apply.
  • We only ship to the lower 48 states.
  • Orders will only ship to PayPal confirmed addresses
  • Orders made after 2:00 PM EST (11:00 AM PST) on Friday will be shipped the next business day.

Note:
As a professional eBay seller, we have two warehouses located in Anaheim, CA and Memphis, TN. In general, we ship out products based on distances UNLESS the closer warehouse is out of stock for the specific products that customers have ordered. Your kind consideration would be highly appreciated.


Terms of Sale

Warranty

This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.


If your item has been damaged in transit or becomes faulty in warranty period, please email us with pictures or video to show the problem.

Please do check everything carefully after you received the parcel, and the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.

Replacement products are provided with the same warranty as the returned products.

 



On Sep-09-19 at 00:47:16 PDT, seller added the following information:

DataCaciques

Related items:

Grizzly G0602Z 10" x 22" Benchtop Metal Lathe with DRO

$2,180.00


End Date: Thursday Nov-7-2019 14:00:24 PST
Buy It Now for only: $2,180.00
Buy It Now | Add to watch list

Details

Levin precision deep 6 jaw chuck, for 8mm watchmaker lathe or Boley tools. SWISS

$575.00


End Date: Sunday Nov-17-2019 0:14:43 PST
Buy It Now for only: $575.00
Buy It Now | Add to watch list

Details

ATLAS CRAFTSMAN LATHE - # M6-501 - MILLING ATTACHMENT - NOS - NEVER USED - TOOL

$149.99

(1 Bid)
End Date: Monday Oct-21-2019 18:00:47 PDT
Bid now | Add to watch list

Details

Clausing 5428 Metal Lathe

$600.00

(2 Bids)
End Date: Saturday Oct-19-2019 17:25:12 PDT
Bid now | Add to watch list

Details

UNiMAT SL 1000 Mini Lathe with box Jewelers Watchmaker

$575.00


End Date: Wednesday Nov-13-2019 13:30:26 PST
Buy It Now for only: $575.00
Buy It Now | Add to watch list

Details

Atlas 101 Lathe, Newly Rebuilt New Paint And Good Condition, Motor Is New.

$560.00

(2 Bids)
End Date: Friday Oct-18-2019 14:41:33 PDT
Bid now | Add to watch list

Details

Vintage 1950's Atlas Tool Post Grinder 1/4 hp. 3,450 rpm. Lathe Attachment #647

$420.00


End Date: Tuesday Nov-12-2019 11:51:33 PST
Buy It Now for only: $420.00
Buy It Now | Add to watch list

Details

South bend lathe 9 10K dorian axa tool post 

$175.00

(0 Bids)
End Date: Tuesday Oct-22-2019 11:29:03 PDT
Bid now | Add to watch list

Details